Prima 1 Tap Hole Stainless Steel Inset Sink with 1 Bowl & Single Lever Tap 860mm

Prima 1 Tap Hole Stainless Steel Inset Sink with 1 Bowl & Single Lever Tap 860mm

An inset sink sits on top of the worktop and can be installed in any material, including laminate. The tap is usually mounted on the sink and often these designs have two tap holes, so they are reversible, meaning the drainer can be positioned either left or right. The tap is suitable for a minimum of 0.3 bar water pressure or above.

• Dimensions: W 860mm x D 500mm x H 170mm
• Main Bowl Dimensions: W 380mm x D 400mm x H 170mm
• Cut-out Dimensions: W 842mm x D 482mm
• Suitable for cabinet widths of 400mm or greater
• Cut-out Dimensions: W 842mm x D 482mm
• Pre-drilled tap holes
• Box contains waste, overflow and single lever tap
• Pre-drilled tap holes
• 0.6mm gauge stainless steel
• Flow aerator for controlled water delivery
• Lifetime guarantee on the sink
• 5 Year guarantee on the tap
• WRAS Approved Tap

Tap warranty does not apply to goods that have been incorrectly installed, used or maintained outside of normal domestic conditions.

Manufacturers Part No. CPR040