Impey Waterguard 10m2 Floor Tanking Kit Inc. WGM10 + WG10/KITONLY

The WaterGuard wetroom tanking membrane is a 1mm thick, strong, flexible membrane making tanking a wet area faster and easier. It comes with a lifetime of tile guarantee, so you can install with complete confidence.

The Butyl rubber coated self-adhesive sealing membrane is supplied on a roll. This makes itvery easy to apply and handle and prevents mess. Waterguard requires no curing time and can be tiled directly after laying, which reduces the installation time dramatically when compared to alternative paint on solutions.

The Polypropylene non-woven surface allows for an easy key for tile adhesive and clearly printed guidelines provide a guide for tiling and measurement.

WaterGuard is 100% compatible with epoxy and solvent-based sealers.

Self adhesive on one side:
Waterguard has a butyl rubber adhesive on one side only and a co-polymer surface on the other. This makes installation much easier as the installer can work on the membrane without getting stuck .

Preformed corners:
Sealed, pre-formed internal and external corners reduce the likelihood of leaks. Eliminating the time consuming process of manually creating corners as with Tilesafe.

Superior waterproofing capabilities:
Tests have proven that Waterguard provides superior waterproofing capabilities to Tilesafe. The test was conducted with a 150mm head of water over a series of weeks. No leak from Waterguard.

Excellent crack bridging properties:
Tests have shown that Waterguard has superior lateral movement (5mm) absorbtion properties caused by the shifting and drying of floors over time.

Not sensitive to chemicals:
Can be used with epoxy grout and solvent based sealers for stone tiles.

Supplied with a butyl sealant:
Butyl sealant is supplied as part of the kit, so no need for the installer to purchase separately. Can also be used to repair small holes in the membrane, if it gets damaged.

Guide lines for easy measurement:
Pre-printed grid lines provide an accurate guide when trimming the membrane.

Supplied with 150mm wide jointing tape:
Waterguard cannot be overlapped, so a jointing tape is supplied to create a watertight seal at any joints.

Impey Part No. WG10.