Product Sections

Main Pages

Best Sellers

PHILMAC PxPxP 25mm/3/4" TEE

Price: £11.13 (Excluding VAT at 17.5%)

find out more

PHILMAC PLASTIC MDPE INSERT 25mm

Price: £0.34 (Excluding VAT at 17.5%)

find out more

PHILMAC PxP ELBOW 25mm/3/4"

Price: £7.82 (Excluding VAT at 17.5%)

find out more

PHILMAC STOP END 25mm/3/4"

Price: £5.78 (Excluding VAT at 17.5%)

find out more

25mm x 100mtr COIL MDPE

Price: £108.77 (Excluding VAT at 17.5%)

find out more

PHILMAC PxP COUPLER 25mm/3/4"

Price: £4.18 (Excluding VAT at 17.5%)

find out more

New Products

CP 35mm COPPER TUBE - 1mtr

Price: £23.95 (Excluding VAT at 17.5%)

find out more

CP 35mm CxC ELBOW

Price: £14.13 (Excluding VAT at 17.5%)

find out more

GAS METER HOUSING - BUILT IN 595mm x 410mm x 210mm

Price: £41.90 (Excluding VAT at 17.5%)

find out more

GAS METER HOUSING - WALL MTD 505mm x 408mm x 225mm

Price: £49.20 (Excluding VAT at 17.5%)

find out more

WHITE TRIWELL HL CISTERN

Price: £114.80 (Excluding VAT at 17.5%)

find out more

Please Click Here to Register Your Account for Online Use or to Open an Account Click Here. You Can Shop Without an Account.
Additional Discount is Available Exclusively to Our Account Holders.

TOOLS

Online Store | TOOLS

Tools:	Bending Springs	Pipe Slices	Olive Removers	Tube Cutters	U Guages	Compression Spanners
	Water Pump Pliers	Brazing Pads	Adjustable Wrenchs	Spanners	Tapermates	Tube Benders
	Trimming Knife	Hacksaws	Hammers	Flat Wood Bits	Core Drills	Pipe Wrenchs
	Allen Key Sets	Gloves	Cutting Wheels	Tile Max Drill Bits	Holesaws	Arbors
	Drain Tester Plugs

JACK 880 HANDSAW
Ref: TO184

Irwin Jack 880 Handsaw
This jack 880 8-9 tpi hand saw from Irwin tools features
FINGER-REST For maximum control.
Irwin Jack 880 saw
Water based lacquer gives 880 Jack hand saw four times better rust protection than traditional lacquer.
0,85MM JACK 880 SAW BLADE with high quality C75 steel is stable and ensures maximum power transfer.
Light and strong ultra sonic welded Jack 880 hand saw soft-grip handle for increased grip and enhanced comfort.
Hard Point Jack 880 saw teeth (HP) stay sharp 6-8 times longer than nonhardened teeth.
90° & 45° angles integrated in the Jack 880 hand saw handle for ease of marking out.
Please note that Irwin tools acquired the Jack brand several years ago hence saws now wearing the Irwin tools / Jack trade marks.

Price: £8.40 (Excluding VAT at 17.5%)

Quantity:

TILE MAX 5mm DRILL BIT
Ref: TO284

Tile Max 5mm Drill Bit
Drilling Applications: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and Granite.
Tile Max Drill Bits have a newly designed and unique "P95" precision tip which has been diamond ground from the best quality tungsten. This enables the user to drill through a wide range of materials such as: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and even Granite!
The asymmetric drill design reduces resistance by 25% ensuring that there is no wandering on start of drilling, there is also less chance of cracking or chipping (dependant on tile type) which leads to a perfectly formed round hole.
The ingenious triangular shaped shank guarantees no slip rotation in the drill machines chuck. Due to the tips unique self renewing design, after frequent use on the hardest materials, the drill can be then used on softer substrates.

Price: £8.50 (Excluding VAT at 17.5%)

Quantity:

TILE MAX 5.5mm DRILL BIT
Ref: TO286

Tile Max 5.5mm Drill Bit
Drilling Applications: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and Granite.
Tile Max Drill Bits have a newly designed and unique "P95" precision tip which has been diamond ground from the best quality tungsten. This enables the user to drill through a wide range of materials such as: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and even Granite!
The asymmetric drill design reduces resistance by 25% ensuring that there is no wandering on start of drilling, there is also less chance of cracking or chipping (dependant on tile type) which leads to a perfectly formed round hole.
The ingenious triangular shaped shank guarantees no slip rotation in the drill machines chuck. Due to the tips unique self renewing design, after frequent use on the hardest materials, the drill can be then used on softer substrates.

Price: £9.00 (Excluding VAT at 17.5%)

Quantity:

TILE MAX 6mm DRILL BIT
Ref: TO288

Tile Max 6mm Drill Bit
Drilling Applications: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and Granite.
Tile Max Drill Bits have a newly designed and unique "P95" precision tip which has been diamond ground from the best quality tungsten. This enables the user to drill through a wide range of materials such as: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and even Granite!
The asymmetric drill design reduces resistance by 25% ensuring that there is no wandering on start of drilling, there is also less chance of cracking or chipping (dependant on tile type) which leads to a perfectly formed round hole.
The ingenious triangular shaped shank guarantees no slip rotation in the drill machines chuck. Due to the tips unique self renewing design, after frequent use on the hardest materials, the drill can be then used on softer substrates.

Price: £9.40 (Excluding VAT at 17.5%)

Quantity:

TILE MAX 6.5mm DRILL BIT
Ref: TO290

Tile Max 6.5mm Drill Bit
Drilling Applications: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and Granite.
Tile Max Drill Bits have a newly designed and unique "P95" precision tip which has been diamond ground from the best quality tungsten. This enables the user to drill through a wide range of materials such as: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and even Granite!
The asymmetric drill design reduces resistance by 25% ensuring that there is no wandering on start of drilling, there is also less chance of cracking or chipping (dependant on tile type) which leads to a perfectly formed round hole.
The ingenious triangular shaped shank guarantees no slip rotation in the drill machines chuck. Due to the tips unique self renewing design, after frequent use on the hardest materials, the drill can be then used on softer substrates.

Price: £11.20 (Excluding VAT at 17.5%)

Quantity:

TILE MAX 7mm DRILL BIT
Ref: TO292

Tile Max 7mm Drill Bit
Drilling Applications: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and Granite.
Tile Max Drill Bits have a newly designed and unique "P95" precision tip which has been diamond ground from the best quality tungsten. This enables the user to drill through a wide range of materials such as: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and even Granite!
The asymmetric drill design reduces resistance by 25% ensuring that there is no wandering on start of drilling, there is also less chance of cracking or chipping (dependant on tile type) which leads to a perfectly formed round hole.
The ingenious triangular shaped shank guarantees no slip rotation in the drill machines chuck. Due to the tips unique self renewing design, after frequent use on the hardest materials, the drill can be then used on softer substrates.

Price: £12.80 (Excluding VAT at 17.5%)

Quantity:

TILE MAX 8mm DRILL BIT
Ref: TO294

Tile Max 8mm Drill Bit
Drilling Applications: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and Granite.
Tile Max Drill Bits have a newly designed and unique "P95" precision tip which has been diamond ground from the best quality tungsten. This enables the user to drill through a wide range of materials such as: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and even Granite!
The asymmetric drill design reduces resistance by 25% ensuring that there is no wandering on start of drilling, there is also less chance of cracking or chipping (dependant on tile type) which leads to a perfectly formed round hole.
The ingenious triangular shaped shank guarantees no slip rotation in the drill machines chuck. Due to the tips unique self renewing design, after frequent use on the hardest materials, the drill can be then used on softer substrates.

Price: £13.40 (Excluding VAT at 17.5%)

Quantity:

TILE MAX 10mm DRILL BIT
Ref: TO296

Tile Max 10mm Drill Bit
Drilling Applications: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and Granite.
Tile Max Drill Bits have a newly designed and unique "P95" precision tip which has been diamond ground from the best quality tungsten. This enables the user to drill through a wide range of materials such as: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble, Concrete, Engineering brick and even Granite!
The asymmetric drill design reduces resistance by 25% ensuring that there is no wandering on start of drilling, there is also less chance of cracking or chipping (dependant on tile type) which leads to a perfectly formed round hole.
The ingenious triangular shaped shank guarantees no slip rotation in the drill machines chuck. Due to the tips unique self renewing design, after frequent use on the hardest materials, the drill can be then used on softer substrates.

Price: £14.90 (Excluding VAT at 17.5%)

Quantity:

Online Store | TOOLS

We Use Recycled Materials for Packing to Reduce Our Carbon Footprint.